I 2 Of 5 Check Character Calculation - Datalogic Magellan 1500i Product Reference Manual

I 2 of 5 Check Character Calculation

I 2 of 5 Check Character Calculation
Enables/disables calculation and verification of an optional Interleaved 2 of 5
check character.
1. To set this feature:
2. Scan the Enter/Exit Programming Mode barcode at the top of the page.
3. Scan either the enable or disable barcode below. You'll need to cover any
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
007001(CR)
I 2 of 5 Check Character Calculation = Enable
Product Reference Guide
If check character calculation is disabled, the risk is increased that
a misread can occur. When disabled, any check characters in a
barcode are treated as data characters.
NOTE
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
Enter/Exit Programming Mode
007000(CR)
I 2 of 5 Check Character Calculation = Disable
211