Enter/Exit Programming Mode
Portugal Post
Portugal Post Enable
Enables/disables the ability of the scanner to decode Portugal Post labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
052901(CR)
Portugal Post = Enable
282
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
052900(CR)
Portugal Post = Disable
Portugal Post Enable
Magellan™ 1500i