Upc/Ean Composites - Datalogic Magellan 1500i Product Reference Manual

Enter/Exit Programming Mode

UPC/EAN Composites

Enables/Disables Composites for the UPC/EAN families of labels.
The value is a bit field where the bits mean the following:
•
•
•
•
•
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode below. You'll need to cover any unused barcodes on this
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
168
A setting of 0 (zero) disables this feature.
Bit0 - if set enabled Composites for UPCE, If clear disables Composites for
UPCE
Bit1 - if set enabled Composites for UPCA, If clear disables Composites for
UPCA
Bit2 - if set enabled Composites for EAN8, If clear disables Composites for
EAN8
Bit3 - if set enabled Composites for EAN13, If clear disables Composites
for EAN13:
and the facing page to ensure that the scanner reads only the barcode you
intend to scan.
that represent the desired number. The selectable range is 0-15 resets.
Pad all single and double digit numbers with leading zeroes to yield a two-
digit entry (00-15).
gramming Mode barcode.
UPC/EAN Composites
Alpha-Numeric Keypad on page 296
02FE(CR)
SetUPC/EAN Composites
Default setting for this feature is:
00 - Disabled
Magellan™ 1500i