Enter/Exit Programming Mode
UPC/EAN Correlation
Enables/disables character correlation for UPC/EAN.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
050701(CR)
UPC/EAN Correlation = Enable
150
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
050700(CR)
UPC/EAN Correlation = Disable
UPC/EAN Correlation
Magellan™ 1500i