Service Port Mode - Datalogic Magellan 1500i Product Reference Manual

About Programming your Scanner

Service Port Mode

To program the Magellan 1500i using software utilities such as Scanalyzer or
Aladdin, the unit must first be placed into Service Port mode. There are two
methods that can be used to accomplish this. Hold the Scan Button
1. Unplug the unit if needed.
2. While holding down the Scan Button on the top of the unit, plug the scan-
3. Quickly release the button as soon as the light on the button illuminates.
Scan the Service Port Mode Barcode
Scan the following barcode to place the scanner in Service Port Mode:
14
ner in.
The scanner will enter Service Port Mode.
- OR-
Enter Service Port Mode
Magellan™ 1500i