Code 93 Length 2 - Datalogic Magellan 1500i Product Reference Manual

Enter/Exit Programming Mode

Code 93 Length 2

If Code 93 Length Control is set to Fixed-Length decoding, this feature speci-
fies Code 93 second fixed length. If Code 93 Length Control is set to Variable-
Length decoding, this feature specifies the maximum label length.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
232
When in Fixed Length mode, if Fixed Length 2 is set to the value of
00 (zero), then only Length 1 will apply.
NOTE
Set Code 93 Length 2 on page 232
cover any unused barcodes on this and the facing page to ensure that the
scanner reads only the barcode you intend to scan.
that represent the desired label length. The selectable range for this
option is 00 (meaning ignore this length), or 01 to 50. Pad all single digit
numbers with a leading zero to yield a two-digit entry (01-50).
gramming Mode barcode.
below. You'll need to
Alpha-Numeric Keypad in Appendix C
0686(CR)
Set Code 93 Length 2
Default setting for this feature = 32 (length = 50)
Code 93 Length 2
Magellan™ 1500i