Center Zone Size - Datalogic Magellan 1500i Product Reference Manual

Enter/Exit Programming Mode

Center Zone Size

Specifies the Center Zone size as a percentage of the full image.
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
26
Set Center Zone Size
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
that represent the desired percentage in hex. The selectable range is 01 -
100%. Pad all numbers with leading zeros to yield a two-digit entry (01-
100).
gramming Mode barcode.
Center Zone Size
below. You'll need to cover any
Alpha-Numeric Keypad in Appendix C
1504\r
Set Center Zone Size
Default setting for this feature is: 10 percent
Magellan™ 1500i