Huawei OceanStor V5 Series Parts Replacement page 95

OceanStor V5 Series
Parts Replacement
Step 2 Wear an ESD wrist strap.
Step 3 Remove a fan module, as shown in
1.
2.
Figure 6-83 Removing a fan module
Step 4 Put the removed fan module into an ESD bag.
Step 5 Take the spare part out of its ESD bag.
Step 6 Insert the spare part into the empty slot until it clicks into place, as shown in
Figure
Issue 15 (2019-12-30)
Press the latch on the panel to open the panel.
Press the latches on the fan module to pull out the fan module.
6-84.
Copyright © Huawei Technologies Co., Ltd.
Figure 6-83.
6 Replacing CRUs
86