Huawei OceanStor V5 Series Parts Replacement page 172

OceanStor V5 Series
Parts Replacement
Figure 7-28 Positions of the nameplate, Huawei logo label, product model label,
and Intel label
Step 7 Optional: Pull the information plate out of the system subrack. (If you face the
front part of the system subrack, the information plate is located at the upper
right of the enclosure, as shown in
but not away from the enclosure.) Attach the device information label to the
information plate. Then, push the information plate back to the enclosure.
Figure 7-29 Position of the information plate
Issue 15 (2019-12-30)
● Two different nameplates are often included upon the product delivery. Please select the
one that contains identical information to the nameplate on the removed system
subrack.
● When attaching the product model label and Intel label, attach the product model label
first and then attach the Intel label under the information on the product model label.
You can attach the device information labels to both the front and back of the information
plate. The label content and positions must be the same as those on the replaced system
subrack. If a label has been attached to one side of the information plate, you only need to
attach the device information label with a QR code to the other side of the information
plate. Attaching the device information plate helps engineers more easily identify and
maintain devices.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-29. Gently pull the information plate,
7 Replacing FRUs
163