Huawei OceanStor V5 Series Parts Replacement page 62

OceanStor V5 Series
Parts Replacement
Figure 6-43 Removing an AC power module
Step 5 Put the removed power module into an ESD bag.
Step 6 Take the spare part out of its ESD bag.
Step 7 Insert the spare part into the empty slot until it clicks into place, as shown in
Figure
Issue 15 (2019-12-30)
6-44.
The procedure for installing a DC power module is the same as that for installing an AC
power module. This step uses the AC power module as an example.
Copyright © Huawei Technologies Co., Ltd.
6 Replacing CRUs
53