Huawei OceanStor V5 Series Parts Replacement page 132

OceanStor V5 Series
Parts Replacement
Figure 6-115 Removing an optical module
Step 5 Put the removed optical module into an ESD bag.
Step 6 Take the spare part out of its ESD bag.
Step 7 Remove the protective cap from the optical module, and insert the optical module
into the port, as shown in
● Before inserting an optical module, ensure that its latches are completely
● Insert the optical module to the enclosure until you hear a "click" sound or feel
● If the optical module is not inserted properly, it will fall out or will cause a link
Figure 6-116 Installing an optical module
Step 8 Insert the optical fibers into the optical module.
Do not look into the optical port without eye protection. The laser beam on the
optical interface board or from the fiber may cause injuries to eyes.
Issue 15 (2019-12-30)
NO TICE
closed.
a slight vibration, which indicates that the optical module is in place.
fault.
Copyright © Huawei Technologies Co., Ltd.
Figure 6-116.
6 Replacing CRUs
123