Huawei OceanStor V5 Series Parts Replacement page 180

OceanStor V5 Series
Parts Replacement
Step 5 Remove the system subrack that you want to replace from the cabinet, as shown
in
1.
2.
Figure 7-35 Removing a system subrack
Step 6 Optional: Attach the nameplate, Huawei logo label, product model label, and
Intel label to the same positions on the spare part as those on the removed
system subrack, as shown in
nameplate, b indicates the position of the Huawei logo label, and c indicates the
position of the product model label and Intel label.
Issue 15 (2019-12-30)
Figure 7-35.
Use the Phillips screwdriver to remove the M6 screws from the system
subrack.
Pull the system subrack out of the cabinet along guide rails and place it on
the ESD table.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-36. a indicates the position of the
7 Replacing FRUs
171