Huawei OceanStor V5 Series Parts Replacement page 216

OceanStor V5 Series
Parts Replacement
Figure 7-64 Installing a controller
Step 8 Wait about five minutes and check the status of the Power indicator on the
controller to determine whether the controller has been powered on, as shown in
Figure
●
●
●
●
●
Issue 15 (2019-12-30)
7-65.
If the Power indicator is steady green, the controller has been powered on.
If the Power indicator is blinking green and the Alarm indicator is blinking
red, the controller is being located.
If the Power indicator is blinking green (0.5 Hz), the controller is powered on
and in the BIOS boot process.
If the Power indicator is blinking green (2 Hz), the controller is in the
operating system boot process or power-off process.
If the Power indicator is off, the controller is absent or powered off.
Copyright © Huawei Technologies Co., Ltd.
7 Replacing FRUs
207