Huawei OceanStor V5 Series Parts Replacement page 248

OceanStor V5 Series
Parts Replacement
Figure 7-90 Installing a management module
Step 8 Connect the cables as labeled.
Step 9 Wait approximately two minutes and check the status of the Power indicator on
the management module to determine whether the management module has
been successfully installed.
●
●
Figure 7-91 Power indicator on a management module
Step 10 Confirm the replacement.
Issue 15 (2019-12-30)
If the indicator is steady green, the management module has been
successfully installed.
If the indicator is steady red or off, the newly installed management module
is faulty, the management module slot is faulty, or the management module
is incorrectly installed.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-91 shows the location of the Power indicator.
7 Replacing FRUs
239