Huawei OceanStor V5 Series Parts Replacement page 261

OceanStor V5 Series
Parts Replacement
Prerequisites
●
●
●
●
●
Tools and Materials
●
●
Procedure
Step 1 (Optional) If only one power module is configured, power off the quorum server.
Step 2 Remove the AC power module.
1.
2.
Issue 15 (2019-12-30)
When two power modules are configured, remove one power module without
powering off the quorum server if the other power module is operating
properly and its power rating is greater than or equal to the rated power of
the quorum server.
You have determined the position on the quorum server for removing a power
module.
You have obtained the cabinet number and chassis number of the quorum
server.
You have located the quorum server based on the preceding information, and
labeled its panel to prevent misoperations.
A spare part is on hand.
ESD gloves or ESD wrist strap
Packaging materials, for example, an ESD bag
Undo the velcro strap that secures the power cable. See
Figure 7-105 Undoing the velcro strap
Remove the power cable from the power module to be replaced. See
7-106.
Copyright © Huawei Technologies Co., Ltd.
7 Replacing FRUs
Figure 7-105.
Figure
252