OceanStor V5 Series
Parts Replacement
Figure 7-23 Fastening screws on the inner guide rails
Step 8 Install the system subrack into the cabinet.
1.
2.
3.
Issue 15 (2019-12-30)
Slide the system subrack into the cabinet along guide rails.
Loosen the two screws on the panel and slowly pull out the enclosure, as
shown in
Figure
7-24.
Figure 7-24 Pulling out an enclosure
Fasten the two screws on the cover and slowly slide the enclosure into the
cabinet, as shown in
Copyright © Huawei Technologies Co., Ltd.
Figure
7-25.
7 Replacing FRUs
157