Huawei OceanStor V5 Series Parts Replacement page 146

OceanStor V5 Series
Parts Replacement
Procedure
Step 1 Run SmartKit.
Step 2 Choose Home > Storage > Routine Maintenance > Health Check.
Step 3 On the Health Check page, perform a health check in the sequence of Device
Selection, Inspection, Information Collection, and then Disk Health Analysis, as
shown in
Figure 7-1 Health check sequence
Step 4 Click Device Selection. The Select Devices page is displayed, as shown in
7-2.
Figure 7-2 Selecting devices
Issue 15 (2019-12-30)
● OceanStor SmartKit users are grouped into Huawei engineers, Channel partner
engineers, Customers, and Visitors based on user permissions. You can log in to the
Inspection tool using one of the preceding roles.
● Visitors users do not have corresponding accounts. When you log in to OceanStor
SmartKit, on the tool activation page that is displayed, select Not activate and go to
the SmartKit GUI. Then you can use the tool as a Visitor.
● If you log in to OceanStor SmartKit as a Visitor, you have only 15 days for trial use. You
cannot use the tool after the trial period expires.
● The following uses Huawei engineers as an example.
Figure 7-1.
Copyright © Huawei Technologies Co., Ltd.
7 Replacing FRUs
Figure
137