Huawei OceanStor V5 Series Parts Replacement page 73

OceanStor V5 Series
Parts Replacement
Step 3 Pull the spring pin upward, and press the adjustable guide rails of the cable
manager to open the cable manager, as shown in
Figure 6-57 Opening the cable manager
Step 4 Remove the power cable from the power module that you want to replace.
1.
2.
3.
Step 5 Press the latch on the power module and pull out the power module, as shown in
Figure
Issue 15 (2019-12-30)
Loosen the retention clip, as shown in step 1 in
Figure 6-58 Removing the AC power cable
Pull up the retention clip, as shown in a of step 2 in
Remove the AC power cable, as shown in b of step 2 in
6-59.
Copyright © Huawei Technologies Co., Ltd.
6 Replacing CRUs
Figure 6-57.
Figure 6-58.
Figure 6-58.
Figure 6-58.
64