Huawei OceanStor V5 Series Parts Replacement page 251

OceanStor V5 Series
Parts Replacement
Step 4 Remove the management module, as shown in
1.
2.
Figure 7-92 Removing a management module
Step 5 Put the removed management module into an ESD bag.
Step 6 Take the spare part out of its ESD bag.
Step 7 Install the spare part, as shown in
1.
2.
Issue 15 (2019-12-30)
Use the Phillips screwdriver to remove the two captive screws from the
management module.
Open the handles and pull out the management module.
Fully open the handles of the spare part, insert the spare part into the empty
slot, and close the handles.
Use the Phillips screwdriver to fasten the two captive screws on the
management module.
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure 7-93.
7 Replacing FRUs
7-92.
242