Huawei OceanStor V5 Series Parts Replacement page 43

OceanStor V5 Series
Parts Replacement
3.
4.
Step 4 Press the latch on the power module to release the handle and pull out the power
module, as shown in
Figure 6-17 Removing an AC power module
Step 5 Put the removed power module into an ESD bag.
Issue 15 (2019-12-30)
Figure 6-16 Removing the DC power cable
Unfasten the screws of the DC power cable with the Phillips screwdriver,
remove the shock absorption sheets, washers, and OT terminal round holes,
as shown in step 2 of
When unfastening the screws from the DC power cable, prevent the shock absorption
sheets and washers from sliding off.
Install the protective cover on the DC power module, as shown in step 3 of
Removing the DC power
Figure
The procedure for removing a DC power module is the same as that for removing an AC
power module. This step uses the AC power module as an example.
Copyright © Huawei Technologies Co., Ltd.
Removing the DC power
cable.
6-17.
6 Replacing CRUs
cable.
34