Huawei OceanStor V5 Series Parts Replacement page 226

OceanStor V5 Series
Parts Replacement
Step 2 Wear an ESD wrist strap.
Step 3 Grip the green part of the optical fiber, remove the MPO end of the optical fiber
from the optical module, and cover the optical fiber with a dustproof cap, as
shown in
Do not look into the optical port without eye protection. The laser beam on the
optical interface board or from the fiber may cause injuries to eyes.
Figure 7-71 Removing the MPO end of the optical fiber
Step 4 Remove the DLC ends of the optical fiber from the ODF distribution box and cover
the optical fiber with a dustproof cap, as shown in
Do not look into the optical port without eye protection. The laser beam on the
optical interface board or from the fiber may cause injuries to eyes.
Figure 7-72 Removing the DLC ends of the optical fiber
Step 5 Take the spare part out of its ESD bag.
Step 6 Take the dustproof cap off the MPO end of the optical fiber. Point the white dot of
the optical fiber downward and insert it directly to the optical module. Grip the
black connector and push it forward until you hear the click or feel the vibration,
as shown in
Issue 15 (2019-12-30)
Figure 7-71.
Figure 7-73.
Copyright © Huawei Technologies Co., Ltd.
7 Replacing FRUs
Figure 7-72.
217