Huawei OceanStor V5 Series Parts Replacement page 44

OceanStor V5 Series
Parts Replacement
Step 6 Take the spare part out of its ESD bag.
Step 7 Open the handle of the spare part, insert the spare part into the empty slot, and
close the handle, as shown in
Figure 6-18 Installing an AC power module
Step 8 Insert the power cables.
●
1.
Issue 15 (2019-12-30)
The procedure for installing a DC power module is the same as that for installing an AC
power module. This step uses the AC power module as an example.
Secure the AC power cables with retention clips.
Press the locker of the retention clip outwards (as shown in a of step 1 in
Figure 6-19), and meanwhile slide the retention clip to the connection part of
the AC power cable (as shown in b of step 1 in
Figure 6-19 Securing the AC power cables with retention clips
Copyright © Huawei Technologies Co., Ltd.
Figure 6-18.
6 Replacing CRUs
Figure 6-19).
35