Safety Precautions For Condensation Prevention - Huawei OceanStor V5 Series Parts Replacement

OceanStor V5 Series
Parts Replacement
●
●
●
Troubleshooting
● Do not touch the connectors of power cables or communication cables.
● Do not touch devices with bare hands in electrostatic sensitive areas. Wear an
When you perform troubleshooting, follow these precautions:
●
●
●

2.8 Safety Precautions for Condensation Prevention

Before installing the equipment, ensure that no condensation is on the equipment.
Otherwise, the equipment may fail to be powered on.
If the indoor and outdoor temperature difference is 15°C or more, wait eight hours
after moving devices to the equipment room and before installing them.
Issue 15 (2019-12-30)
Do not remove or insert cables and field replaceable units (FRUs) during a
system startup. Otherwise, data loss may occur.
After you switch off the power supply, wait at least one minute before
switching it back on.
To avoid disk damage and data loss, do not switch the power supply off while
any disk running indicators are still blinking.
Otherwise, an electric shock may occur.
ESD wrist strap, ESD gloves, or ESD clothing to prevent personal injury and
equipment damage.
Do not perform troubleshooting during a thunderstorm.
Ensure that power cables are intact and the grounding measures are safe and
effective.
Keep the troubleshooting area clean and dry.
If the temperature difference cannot be determined, wait one night after moving devices to
the equipment room and then install them.
Copyright © Huawei Technologies Co., Ltd.
2 Safety Operation Guide
8