Huawei OceanStor V5 Series Parts Replacement page 125

OceanStor V5 Series
Parts Replacement
Step 4 Place the removed expansion module into an ESD bag.
Step 5 Take the spare part out of its ESD bag.
Step 6 Open the handles of the spare part, insert the spare part into the empty slot, and
close the handles, as shown in
Figure 6-110 Installing an expansion module
Step 7 Connect the cables as labeled.
Step 8 Wait approximately two minutes and check the status of the Power and Alarm
indicators on the expansion module to determine whether the expansion module
has been successfully installed.
and Alarm indicators.
●
●
Issue 15 (2019-12-30)
If the Power indicator is steady on and the Alarm indicator is off, the
expansion module has been successfully installed.
If the Power indicator is off or the Alarm indicator is steady on, the newly
installed expansion module is faulty, the expansion module slot is faulty, or
the expansion module is incorrectly installed.
Copyright © Huawei Technologies Co., Ltd.
Figure 6-110.
Figure 6-111 shows the locations of the Power
6 Replacing CRUs
116