Huawei OceanStor V5 Series Parts Replacement page 129

OceanStor V5 Series
Parts Replacement
Figure 6-113 Installing an expansion module
Step 7 Connect cables of the expansion module.
Step 8 Wait approximately two minutes and check the status of Power and Alarm
indicators on the expansion module to determine whether the expansion module
has been successfully installed.
Alarm indicators on the expansion module.
●
●
Figure 6-114 Indicators on an expansion module
Issue 15 (2019-12-30)
If the Power indicator is steady on and the Alarm indicator is off, the
expansion module has been successfully installed.
If the Power indicator is off or the Alarm indicator is steady on, the newly
installed expansion module is faulty, the slot for the expansion module is
faulty, or the expansion module is incorrectly installed.
Copyright © Huawei Technologies Co., Ltd.
Figure 6-114 shows the locations of Power and
6 Replacing CRUs
120