Huawei OceanStor V5 Series Parts Replacement page 84

OceanStor V5 Series
Parts Replacement
Figure 6-71 Installing a BBU
Step 7 Wait approximately one minute and check the status of the Running/Alarm
indicator on the BBU to determine whether the BBU has been successfully
installed.
●
●
Figure 6-72 Running/Alarm indicator on a BBU
Issue 15 (2019-12-30)
Figure 6-72 shows the location of the Running/Alarm indicator.
If the indicator is steady green or blinking green, the BBU has been
successfully installed.
If the indicator is steady red or off, the newly installed BBU is faulty, the BBU
slot is faulty, or the BBU is incorrectly installed.
Copyright © Huawei Technologies Co., Ltd.
6 Replacing CRUs
75