Huawei OceanStor V5 Series Parts Replacement page 185

OceanStor V5 Series
Parts Replacement
Figure 7-39 Position of the product model bar
Step 5 Remove components from the system subrack that you want to replace and
reinstall them to their corresponding positions on the spare part.
Step 6 Remove the system subrack that you want to replace from the cabinet, as shown
in
1.
2.
Issue 15 (2019-12-30)
Multiple different product model bars are often included in the product. Please select the
one that contains identical information to the product model bar on system subrack that
you want to replace.
Figure 7-40.
Open the mounting ear cover. Use the Phillips screwdriver to remove the M6
screws from the system subrack.
Pull the system subrack out of the cabinet along guide rails and place it on
the ESD table.
Copyright © Huawei Technologies Co., Ltd.
7 Replacing FRUs
176