Huawei OceanStor V5 Series Parts Replacement page 50

OceanStor V5 Series
Parts Replacement
Step 7 Take the spare part out of its ESD bag.
Step 8 Insert the BBU into the spare part until it clicks into place, as shown in
6-27.
Figure 6-27 Installing a BBU
Step 9 Open the handle of the spare part, insert the spare part into the empty slot, and
close the handle, as shown in
Issue 15 (2019-12-30)
The procedure for installing a DC power module is the same as that for installing an AC
power module. This step uses the AC power module as an example.
Copyright © Huawei Technologies Co., Ltd.
Figure 6-28.
6 Replacing CRUs
Figure
41