OceanStor V5 Series
Parts Replacement
Figure 6-79 Installing a fan module
Step 7 Wait approximately two minutes and check the status of the Running/Alarm
indicator on the fan module to determine whether the fan module has been
successfully installed.
indicator.
●
●
Figure 6-80 Running/Alarm indicator on a fan module
Step 8 If the fan module has been successfully installed, close the panel, as shown in
Figure
Issue 15 (2019-12-30)
Figure 6-80
If the indicator is steady green, the fan module has been successfully installed.
If the indicator is steady red or off, the newly installed fan module is faulty,
the fan module slot is faulty, or the fan module is incorrectly installed.
6-81.
Copyright © Huawei Technologies Co., Ltd.
shows the location of the Running/Alarm
6 Replacing CRUs
83