Huawei OceanStor V5 Series Parts Replacement page 187

OceanStor V5 Series
Parts Replacement
Step 8 Optional: Pull the information plate out of the system subrack. (If you face the
front part of the system subrack, the information plate is located at the lower
right of the enclosure, as shown in
but not away from the enclosure.) Attach the device information label to the
information plate. After that, push the information plate back to the enclosure.
Figure 7-42 Position of the information plate
Step 9 Install the spare part into the cabinet, as shown in
1.
2.
3.
Issue 15 (2019-12-30)
Two different nameplates are often included upon the product delivery. Select the one that
contains identical information to the nameplate on the removed system subrack.
You can attach the device information labels to both the front and back of the information
plate. The label content and positions must be the same as those on the replaced system
subrack. If a label has been attached to one side of the information plate, you only need to
attach the device information label with a QR code to the other side of the information
plate. Attaching the device information plate helps engineers easily identify and maintain
devices.
Slide the system subrack into the cabinet along guide rails.
Use M6 screws to fix the system subrack in the cabinet. Close the mounting
ear cover.
Ensure that the system subrack is horizontally installed and tightly screwed.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-42. Gently pull the information plate,
Figure
7 Replacing FRUs
7-43.
178