Huawei OceanStor V5 Series Parts Replacement page 111

OceanStor V5 Series
Parts Replacement
2.
You can proceed to next steps only when all items pass the pre-replacement check
and the replacement page is displayed. If any item fails, rectify the fault as
prompted.
Step 2 Wear an ESD wrist strap.
Step 3 Press the latch on the disk module to release the handle and pull out the disk
module, as shown in
Issue 15 (2019-12-30)
If any items fail the inspection, rectify the faults by performing the recommended
actions in the inspection reports. Ensure that all other parts except the parts to be
replaced are working properly.
Check the status of the parts to be replaced.
Start SmartKit and choose Home > Storage > Parts Replacement > More >
Parts Replacement (CRU). On the CRU replacement page, complete the
check before the replacement as prompted. For details, see
CRU.
NO TICE
Figure
Copyright © Huawei Technologies Co., Ltd.
6-100.
6 Replacing CRUs
6.1.3 Replacing a
102