OceanStor V5 Series
Parts Replacement
4.
5.
Step 6 Click OK, go back to the Health Check page, and click Inspection, as shown in
Figure
Issue 15 (2019-12-30)
Figure 7-4 Add Device Step 2-2: Configure Information
Enter configurations, including the user name, password, and port of the
device. In the Login Information area, enter the Username, Password, and
Port of the device to be added. The default value of Port is 22.
– The default user name and password of the storage system are admin and
Admin@storage respectively.
– Run show system server_port server_name=SSH to check whether the SSH port
ID is 22. If the port ID is not 22, run change system server_port
server_name=SSH port_num=22 to change it to 22.
Click Finish.
The newly added device is displayed in the device list.
● When a device is added for the first time or a device certificate is not trusted, a message
is displayed indicating that the connection is not trusted.
● When an SSH server is added for the first time or the fingerprint of an SSH server
changes, a message is displayed asking whether you want to continue to register the
SSH server.
7-5.
Copyright © Huawei Technologies Co., Ltd.
7 Replacing FRUs
139