Maintenance Activities For Each Component - Avaya CallPilot 600r Maintenance And Diagnostics

Section
Maintenance
Diagnostics

Maintenance activities for each component

The following table identifies the maintenance activities you can perform for each component
listed in the component tree.
Table 17: Maintenance activities
Component
Media Bus
MPB96 board
Time switch
Avaya CallPilot® 600r Server Maintenance and Diagnostics
• the name, class, type, series, or version of a component
• various capabilities of a component (for example, whether a
component is removable)
Note:
This section does not appear for all components.
This section shows the state of the selected component. Use
this section to start and stop a component before running a
diagnostic test.
This section appears only for components on which you are
allowed to perform maintenance administration.
For more information about working with component states, see
the following sections:
• Viewing component states
• Starting and stopping components
Use the Diagnostics section to run one or more diagnostic tests,
or to view the results of the last diagnostic tests that were run
on the selected component.
This section appears only for components on which you are
allowed to run diagnostics.
For more information about running diagnostics, see the
following sections:
• Running integrated diagnostics
• Viewing the last diagnostic results
Start, stop? Courtesy stop?
Yes No
Yes No
No No
Maintenance activities for each component
Description
on page 50
on page 52
on page 54
on page 57
Diagnostics Replaceable?
available?
No No
Yes Yes
No No
December 2010 49