2
Introduction to Programming
LAN Capabilities of the AC Source
The ac source conforms to the LAN eXtensions for Instrumentation (LXI) Device
Specification 2011 version 1.4. The Telnet, Socket, and VXI-11 interfaces are
available to communicate with the ac source that works on either static or
dynamic IP address.
Instrument Web server
The ac source has a built-in Web server that gives you direct control from an
Internet browser on your computer. With the Web server, you can access the front
panel control functions including the LAN configuration parameters.
The built-in Web server only operates over the LAN interface. It requires Internet
NOTE
Explorer 9 onwards.
The Web server is enabled when shipped. Perform the following steps to launch
the Web server:
1 Establish a LAN interface connection from your computer to the ac source.
2 To launch the Web server, enter the instrument's IP address or fully-qualified
3 To begin controlling your instrument, click the Browser Web Control button in
4 For additional help, click the "Help Page" button on the navigation bar.
30
hostname into the browser's Address field.
the navigation bar on the left.
Keysight Models 6811C, 6812C, and 6813C Programming Guide