System:communicate:lan:update - Keysight Technologies 6811C Programming Manual

Language Dictionary 3

SYSTem:COMMunicate:LAN:UPDate

Stores any changes made to the LAN settings into non-volatile memory and
restarts the LAN driver with the updated settings. The command must be sent
after changing the settings for DHCP, DNS, gateway, hostname, IP address,
subnet mask. Make all changes to the LAN settings before sending this command.
The following example configures the instrument to use statically assigned LAN
settings.
SYST:COMM:LAN:DHCP OFF
SYST:COMM:LAN:DNS "198.105.232.4"
SYST:COMM:LAN:DNS2 "198.105.232.5"
SYST:COMM:LAN:GAT "198.105.232.1"
SYST:COMM:LAN:HOST "LAB1-DMM"
SYST:COMM:LAN:IPAD "198.105.232.101"
SYST:COMM:LAN:SMAS "255.255.255.0"
SYST:COMM:LAN:UPD
The following example configures the instrument back to use DHCP.
SYST:COMM:LAN:DHCP ON
SYST:COMM:LAN:UPD
Command syntax SYSTem:COMMunicate:LAN:UPDate
Parameters None
Examples
SYST:COMM:LAN:UPD
Keysight Models 6811C, 6812C, and 6813C Programming Guide 187