List:count - Keysight Technologies 6811C Programming Manual

[SOURce:]

LIST:COUNt

This command sets the number of times that the list is executed before it is
completed. The command accepts parameters in the range 1 through 9.9E37, but
any number greater than 2E9 is interpreted as infinity. Use INFinity to execute a
list indefinitely.
Returned parameters <NR3>
Keysight Models 6811C, 6812C, and 6813C Programming Guide
LIST
:SHAPe <shape>{, <shape>} Sets the waveform shape list
:POINts?
:STEP <step>
:TTLTrg <bool>{, <bool>}
:POINts?
:VOLTage
[:LEVel] <n>{, <n>}
:POINts?
:SLEW <n>{, <n>}
:POINts?
:OFFSet <n>{, <n>}
:POINts?
:SLEW <n>{, <n>}
:POINts?
Command syntax [SOURce:]LIST:COUNt <NRf+> | INFinity
Parameters 1 to 9.9E37 | MINimum | MAXimum | INFinity
*RST value 1
Examples
LIST:COUN 3
Query syntax [SOURce:]LIST:COUNt?
Related commands LIST:CURR
Returns the number of shape list points
Specifies how the list responds to triggers (ONCE | AUTO)
Defines the output marker list
Returns the number of output marker list points
Sets the voltage list
Returns the number of voltage level points
Sets the voltage slew list
Returns the number of voltage slew points
Sets the voltage offset list
Returns the number of voltage offset points
Sets the offset voltage slew list
Returns the number of offset voltage slew points
LIST:COUN INF
LIST:FREQ LIST:TTLT
Language Dictionary
LIST:VOLT
3
135