CALibrate:CURRent:AC
CALibration:CURRent:AC
This command can only be used in the calibration mode. It initiates the calibration
of the AC current limit and metering circuits.
CALibrate:CURRent:EXTernal
CALibration:CURRent:EXTernal
Keysight 6811C/6812C/6813C Option 020 only.
Initiates calibration of the external current measurement.
CALibrate:CURRent:MEASure
CALibration:CURRent:MEASure
This command is used to initiate the calibration of the current metering circuits
and the peak current limit circuits. It can only be used in the calibration mode.
Keysight Models 6811C, 6812C, and 6813C Programming Guide
Command syntax CALibrate:CURRent:AC
CALibration:CURRent:AC
Parameters None
Examples
CAL:CURR:AC
Related commands CAL:STAT
Command syntax CALibrate:CURRent:EXTernal
CALibration:CURRent:EXTernal
Parameters None
Examples
CAL:CURR:EXT
Command syntax CALibrate:CURRent:MEASure
CALibration:CURRent:MEASure
Parameters None
Examples
CAL:CURR:MEAS
Related commands CAL:STAT
CAL:SAVE
CAL:LEV
CAL:SAVE
CAL:LEV
Language Dictionary
3
59