List:frequency:slew; List:frequency:slew:points - Keysight Technologies 6811C Programming Manual

LIST:FREQuency:SLEW

This command specifies the output frequency slew list points. The slew points are
given in the command parameters, which are separated by commas. The order in
which the points are entered determines the sequence in which they are output
when a list is triggered. Changing list data while a subsystem is in list mode
generates an implied ABORt.
Returned parameters <NR3>{, <NR3>}

LIST:FREQuency:SLEW:POINts?

This query returns the number of points specified in LIST:FREQuency:SLEW. Note
that it returns only the total number of points, not the point values.
Returned parameters <NR1>
Keysight Models 6811C, 6812C, and 6813C Programming Guide
Command syntax [SOURce:]LIST:FREQuency:SLEW <NRf+> | INF {, <NRf+> | INF}
Parameters 0 to 9.9E37 | MAXimum | MINimum | INFinity
Unit Hz (hertz per second)
Examples
LIST:FREQ:SLEW 10, 20, 1E2
Query syntax [SOURce:]LIST:FREQuency:SLEW?
Related commands LIST:FREQ:SLEW:POIN?
Query syntax [SOURce:]LIST:FREQuency:SLEW:POINts?
Examples
LIST:FREQ:SLEW:POIN?
Related commands LIST:FREQ:SLEW
Language Dictionary
LIST:COUN LIST:DWEL
3
LIST:STEP
139