Questionable Status Group - Keysight Technologies 6811C Programming Manual

Questionable Status Group

The Questionable Status registers record signals that indicate abnormal operation
of the ac source. As shown in the
of registers as the Status Operation group.
Register
Condition
PTR filter
NTR filter
Event
Enable
The outputs of the Questionable Status group are logically-ORed into the
QUEStionable summary bit (3) of the Status Byte register.
Keysight Models 6811C, 6812C, and 6813C Programming Guide
Command
STAT:QUES:COND?
STAT:QUES:PTR <n>
STAT:QUES:NTR <n>
STAT:QUES:EVEN?
STAT:QUES:ENAB? <n>
Programming Examples
Figure 5-5, the group consists of the same type
Description
A register that holds real-time status of the circuits being
monitored. It is a read-only register.
A positive transition filter that functions as described under
STAT:QUES:NTR|PTR commands in
Dictionary". It is a read/write register.
A negative transition filter that functions as described under
STAT:QUES:NTR|PTR commands in
Dictionary". It is a read/write register.
A register that latches any condition that is passed through
the PTR or NTR filters. It is a read-only register that is
cleared when read.
A register that functions as a mask for enabling specific bits
from the Event register. It is a read/write register.
5
Chapter 3, "Language
Chapter 3, "Language
263