System Subsystem Commands; Subsystem Syntax - Keysight Technologies 6811C Programming Manual

3 Language Dictionary

System Subsystem Commands

The system commands control the system-level functions of the ac source.

Subsystem syntax

SECurity
SYSTem
176
[:IMMediate]
:COMMunicate
:LAN
:CONTrol?
:DHCP
:DNS[{1|2}]
:DOMain?
:GATeway <quoted_address>
:HOSTname <quoted_string>
:IPADdress <quoted_address>
:MAC?
:SMASk <quoted_address>
:TELNet
:PROMpt<quoted_string>
:WMESsage <quoted_string> Sets the welcome message
:UPDate
:RLSTate <mode>
:TCPip
:CONTrol?
:ERRor?
:LANGuage <language>
:PERSona
:MANufacturer <quoted_string>
:DEFault
:MODel <quoted_string>
:DEFault
:SECurity
:COUNt?
[:IMMediate]
:SET <binary_block>
Keysight Models 6811C, 6812C, and 6813C Programming Guide
Reads the initial control connection port number
Disables or enables instrument's use of DHCP
Assigns static IP addresses
Returns the domain name assigned to the ac source
Assigns a default gateway for the ac source
Assigns a hostname to the ac source
Assigns a static Internet Protocol (IP) address
Returns the Media Access Control (MAC) address
Assigns a subnet mask for the ac source
Sets the command prompt
Stores changes made to the LAN settings
Sets the state of the interface
Sets the overall operating mode of the ac source
Returns the error number and error string
Sets the command language of the ac source to SCPI
Sets the manufacturer string
Sets the manufacturer string to Keysight
Technologies
Sets the model string returned by *IDN? Query
Sets the model string to default
Returns the security count of the ac source
Clears all user-accessible instrument memory
Sets up the ac source