Source Subsystem (Voltage) Commands; Subsystem Syntax - Keysight Technologies 6811C Programming Manual

3 Language Dictionary

Source Subsystem (Voltage) Commands

This subsystem programs the output voltage of the ac source.

Subsystem syntax

[SOURce:]
154
VOLTage
[:LEVel]
[:IMMediate]
[:AMPLitude] <n>
:TRIGgered
[:AMPLitude] <n>
:AUXiliary
[:LEVel]
[:IMMediate]
[:AMPLitude] <n>
:MODE <mode>
:OFFSet
[:IMMediate] <n>
:MODE <mode>
:TRIGgered <n>
:SLEW
[:IMMediate] <n> | INFinity Sets the voltage slew rate
:MODE <mode>
:TRIGgered <n> | INFinity
:PROTection
[:LEVel] <n>
:STATe <bool>
:SENSe | :ALC
:DETector <type>
:SOURce <source>
:SLEW
[:IMMediate] <n> | INFinity
:MODE <mode>
:TRIGgered <n> | INFinity
Keysight Models 6811C, 6812C, and 6813C Programming Guide
Sets the AC rms voltage amplitude of the ac source
Sets the transient voltage amplitude of the ac source
Sets the AC rms voltage amplitude of the auxiliary
output
Sets the voltage mode (FIX | STEP | PULS | LIST)
Sets the DC offset voltage
Sets the offset mode (FIX | STEP | PULS | LIST)
Sets the transient DC offset voltage
Sets voltage slew mode (FIX | STEP | PULS | LIST)
Sets the transient voltage slew rate
Sets the overvoltage protection threshold
Sets the overvoltage protection state
Sets the sense detector (RTIM | RMS)
Sets voltage sense source (INT | EXT)
Sets the voltage slew rate
Sets voltage slew mode (FIX | STEP | PULS | LIST)
Sets the transient voltage slew rate