Table of Contents
Advertisement
Getting Started
Power Requirements
Power Requirements
AC Power Cord
14
The spectrum analyzer has an auto-ranging line voltage input. The
AC power supply must meet the following requirements:
Vol tage:
100 to 240 VAC
Frequency:
50 to 60 Hz
Power:
Maximum 100 W
The analyzer is equipped with a three-wire power cord, in
accordance with international safety standards. This cable grounds
the analyzer cabinet when connected to an appropriate power line
outlet. The cable appropriate to the original shipping location is
included with the analyzer.
Various AC power cables are available that are unique to specific
geographic areas. You can order additional AC power cables for
use in different areas. The table AC Power Cords lists the available
AC power cables, the plug configurations, and identifies the
geographic area in which each cable is appropriate.
The detachable power cord is the product disconnecting device. It
disconnects the mains circuits from the mains supply before other
parts of the product. The front panel switch is only a standby
switch and do not disconnect instrument from LINE power.
Advertisement
Table of Contents
