Collecting Used Toner - Ricoh Beluga-C1 Training

Collecting Used Toner

Slide 153
The service manual states the capacity of the bottle.
The sensor is half way between the spout and the side of the machine, so there
should not be many premature alarms caused by piles of toner building up in
front of the sensor.
There is no mechanism to shake the bottle and level the waste toner.
Registration motor: Drives the
toner collection coil
Toner collection coil: Transfers
used toner from the drum to the
used toner tank.
Toner overflow sensor: Detects
when the tank is almost full
When near-full is detected,
another 20 m of copies can be
made. Then copying is disabled.
The current job is completed,
and then the used toner bottle
must be emptied.
Recovery: Switch the machine
off/on. If the error message still
appears, empty the bottle and
Overflow
switch off/on again.
Sensor
153
Beluga-C1/C1.5 Training