Tightening Torque Figures - Husqvarna CR 65 2012 Workshop Manual

TIGHTENING TORQUE FIGURES

CR 65 2012
X
Section
Tighten all nuts and screws to the specified torque using a torque wrench. If not tightened securely, a nut or a screw might
become damaged or work itself loose, causing damage to motorcycle and injury to rider. An overtightened nut or screw might
become damaged, its thread might strip, or the nut/screw might fail and work itself loose. Listed in the table are the tightening
torque figures for the most important nuts and screws, which have determined in accordance with thread diameter, pitch and
specific application. These figures are obtained after cleaning the threads with solvent.
Workshop Manual Ed. 09-2011
X.1