Table of Contents
Advertisement
7.16
Setting the units
Info
Make the setting according to the country.
If the unit is changed, the value ODO is retained and converted accordingly.
COMBINATION INSTRUMENT 7
Info
Do not open the throttle during the selection.
If switching ABS mode was unsuccessful, the previ-
ously set ABS mode will remain active.
A flashing ABS mode indicates that the ABS mode
displayed does not match the actual ABS mode of the
ABS due to a malfunction.
If the ABS mode ROAD is enabled, ABS controls both
wheels.
If the ABS mode SUPERMOTO is enabled, ABS only
controls the front wheel. The rear wheel is not con-
trolled by ABS and may lock during braking maneu-
vers.
Condition
The motorcycle is stationary.
–
Press the MODE button briefly and repeatedly until ODO
appears on the display.
–
Press the MODE button for five seconds.
The units display appears.
Info
The units display appears in the ODO display for each
menu by keeping the MODE button pressed.
–
Press the SET button briefly and repeatedly until the desired
F01402-01
unit appears in the display.
–
Do not actuate the MODE button and SET button for about
five seconds.
The units display disappears and the selected unit of the
first line is adopted and saved.
Info
km or miles can be set as a length unit.
l, USga, or UKga can be set as a volume unit.
33
Advertisement
Table of Contents
