Setting The Units - Husqvarna Vitpilen 401 2018 Owner's Manual

8.14

Setting the units

Info
Make the setting according to the country.
If you change the unit, the value ODO is retained and converted accordingly.
COMBINATION INSTRUMENT 8
Condition
The motorcycle is stationary.
–
Press the MODE button briefly and repeatedly until ODO
appears on the display.
–
Press the MODE button for 5 seconds.
The units display appears.
Info
The units display is shown on the ODO display for
each menu by keeping the MODE button pressed.
F01402-01
–
Press the SET button briefly and repeatedly until the desired
unit appears.
–
Do not actuate MODE button and SET button for about 5
seconds.
The units display disappears and the selected unit of the
first line is adopted and saved.
77