General Instructions On Installation - Festo CPX-FB13 Electronic Manual

1. Installation
1.1

General instructions on installation

1−4
Warning
Before carrying out installation and/or maintenance work,
switch off the following:
the compressed air supply
the operating voltage supply for the electronics/sensors
the load voltage supply for the outputs/valves.
You will thereby avoid:
uncontrolled movements of loose tubing
uncontrolled movements of the connected actuators
undefined switching states of the electronics.
Caution
The CPX field bus node contains electrostatically sensitive
components.
Do not touch the electrical contacts of the components.
·
Observe the regulations for handling electrostatically
·
sensitive components.
In this way you will avoid damage to the electronics.
Information on fitting the CPX terminal can be found in the
CPX system manual (P.BE−CPX−SYS−..).
Festo P.BE−CPX−FB13−EN en 0308a