Electronics; Removing And Installing The Fuse; Removing The Top Cover Interlock Switch - Christie GS Series Service Manual

Electronics

Learn how to replace the electronic components in the projector.

Removing and installing the fuse

To remove and install the fuse, complete the following steps.
1. Remove the top cover.
See Removing the top cover
2. Remove the screw on the fuse.
3. Release the fuse.
4. Replace the fuse with a new one, tightening the screw attached.
5. To re-install, follow these steps in reverse order.

Removing the top cover interlock switch

The top cover interlock switch prevents the projector from operating when the top cover is off the
projector.
1. Remove the top cover.
See Removing the top cover
2. Remove the left-side cover.
See Removing the left-side cover
GS Series 700-850 Service Manual
020-001054-02 Rev. 1 (04-2017)
on page 57.
on page 57.
on page 60.
67