Replacing A Projector's Foot - Christie GS Series Service Manual

12. Replace the bottom cover.
13. To re-install, follow these steps in reverse order.

Replacing a projector's foot

The adjustable feet can be raised or lowered when positioning the projector to make sure it is level
on all sides so the displayed image appears rectangular without any keystone.
1. Ensure the projector is in a secure position.
Christie does not recommend having the projector overhang when replacing the feet, unless the
projector is securely positioned.
2. Loosen the screw and remove the foot.
3. Replace the foot.
4. Repeat steps 2 and 3 for any additional feet that need to be replaced.
5. To re-install, follow these steps in reverse order.
GS Series 700-850 Service Manual
020-001054-02 Rev. 1 (04-2017)
Projector covers and feet
63