Running a remote port performance test
ID
Part name
1
Test equipment
2
Test signal
3
Inspection item
4
Inspection distance
5
Criteria
To perform the remote port performance test, complete the following steps.
1. Connect the projector and remote controller using a audio cable.
2. On the IR remote, press Menu.
The image of on-screen display menu is projected.
Running a USB A port performance test
ID
Part name
1
Test equipment
2
Test signal
3
Inspection item
4
Inspection distance
5
Criteria
To perform the USB A port performance test, complete the following steps.
1. Connect a U disk to the projector over the USB A port.
2. Select the signal source Card reader.
The data of U disk is projected.
GS Series 700-850 Service Manual
020-001054-02 Rev. 1 (04-2017)
Description
Remote controller
None
Wired remote port performance test
1.8 to 2.2 m
No abnormal line distortion or noise exist on the screen
Description
U disk
64 Gray
USB A port performance test
1.8 to 2.2 m
No abnormal color performance, line distortion, or noise exist on the screen
Service setups
30